b774d03162
Change the y-axis direction for a 2d Cider gnuplot. The device surface is at the top and downwards is into the material, which is the normal presentation. Note that the x/y mesh commands in a Cider model also affect the orientation.
4 years ago
62f326b9d0
Fix a bug from previous commit: min -> MIN
4 years ago
0eb272243f
Enable RKM notation also for inductors (e.g. 1u2 for 1.2u)
4 years ago
640fa7e17b
bug 578 crash when scale is too short
Warning message if scale and vector length do not match.
Restrict number of points plotted to the smaller of both.
4 years ago
4f82a24df2
Add parameter 'isgrid' to plotting of arcs.
Smithgrid and polar plots could not discern between xgridwidth and
xbrushwidth. This is now available, similar to straight line plotting.
Tested also for PS and SVG.
4 years ago
16f586b65e
Respect the "tstart" parameter when saving event node data (XSPICE).
Fixes Support Request #47 : "XSpice memory usage (TRAN TSTART effect)".
4 years ago
6494befb2f
Request backing store for X11 plot windows. When supported by the X server
windows are redrawn vey quickly without replotting.
4 years ago
f4285384e7
Add code in graf.c to merge connected lines with the same slope before
plotting. This speeds output and reduces file size when the vector
length is much larger than the number of pixels. It should help with
Feature Request #58 :
"Graph plotting under windows redraw very slow and hard to work with",
but is not a full fix.
4 years ago
ce9bc9fc64
The re-painting due to mouse-click under MS Windows is caused by line 561
of windisp.c. Upon left mouse button up the plot recangle is invalidated,
and a WM_PAINT message is generated (same on line 614 for right mouse
button up). If not re-pained, artifacts may be left on the canvas after
collecting coordinate data.
Shifting the command InvalidateRect to a place where it becomes active
only after the mouse has been moved, does the trick. Simple clicking
(right or left) will not cause a re-paint any more.
4 years ago
857fbec985
Improve iteration limit options display
4 years ago
74787f0c33
Fix EXTERNAL type in isrc
4 years ago
ced2128f58
.measure results from batch mode may be saved in a file
(in addition to the printout)
Add command
set measoutfile=<path/filename>
to .spiceinit or to a .control section in the netlist
4 years ago
0c34ac019f
use total current for diffcap calculation
4 years ago
4ee0586cee
Enable output redirection for meas command
replace printf("... by fprintf(mout, "...
mout is routinely set to cp_out, which then allows redirection by > and >>
4 years ago
018713cc43
Bug 572 Error message 'function 'xyz' currently not supported' was buggy.
xyz had not been set.
Copy function name to the heap and free accordingly.
4 years ago
46696a6aaa
If function is not found, bail out if strict_errorhandling is set.
4 years ago
632f8c033d
Make numoparam error messages more user friendly.
Add line number of netlist to the message.
Original line number added to new lines in inpcom.c.
Internal error messages only when 'ngdebug' is set
4 years ago
08bc3ccdd6
Remove compiler warnings (writ_ifs.c ipcsockets.c).
4 years ago
1558c5abcb
Add a suitable error message and fallback to default temperature
if an error in the temperature entry is found.
4 years ago
5a065c1657
Originally only '.temp 125' had been accepted.
There has not been any error message if '=' was used,
the temperature just had been set to 0°C.
Now also '.temp=125' or .temp='param' are accepted.
4 years ago
23e9df0181
Fix for ticket #570 : Interactive prompting is always active.
Control prompting with variable "interactive" and stop setting it by default.
Add code in main.c to set it for an interactve session.
4 years ago
c4e94cd59b
safeguard against a crash when the s line is buggy
4 years ago
64dba93b93
We are now developing ngspice-36+
4 years ago
f0e9a35eb6
Add 'esave' command to save only specific event nodes.
Add a prompt for esave/eprint/eprvcd.
4 years ago
9308c6b077
Reuse memory for queued events.
Patch #109 - 2 provided by Giles Atkinson
4 years ago
0c59a77fc4
During op evaluation we might use source stepping.
Independent V and I sources are stepped, the B source however is not.
Add source stepping to B source.
4 years ago
486dd587d0
spelling: Fix misspelled word Instnace
4 years ago
8263e2a4da
The AD and DA hybrid XSPICE bridges consume a lot of
memory (one state per time step added). Memory of
previous time steps is not recovered.
Patch #109 by Giles Atkinson reduces memory consumption
dramatically (> factor of 10).
4 years ago
1a6a9e6bb6
Add com_wr_ic.h to their makefile.am
to have them as part of make dist.
4 years ago
43f2182e56
Add com_optran.h and cplhash.h to their makefile.am
to have them as part of make dist.
4 years ago
c7bc84943a
plug a memory leak
4 years ago
a8d8600faa
plug a memory leak
4 years ago
cb0d8f18dc
Prepare for ngspice-36
4 years ago
4f73c27d86
Memory access error: don't free GENinst->GENname.
Use memcpy to overwrite old name by a (shorter) new name.
Compiler warnings are thus removed.
4 years ago
9be9f46f96
Remove unused function Evt_Data_destroy()
4 years ago
6ba484e5d2
Remove redundant redeclaration of ‘ft_getpnames_quotes’
4 years ago
5adbfc1c86
Remove compiler warnings associated with snprintf()
Use memory allocated on the heap instead.
4 years ago
b5b462506f
add a function prototype for com_wric()
4 years ago
3bac1ffabe
Allow adequate size for copying.
Add the missing character string to fprintf.
4 years ago
b636017359
add function prototype
for insert_new_line()
4 years ago
8e75cad453
Fix missing initializer warning.
4 years ago
11117912f9
typos
4 years ago
1605d293d0
Add function integ to control language
Trapezoidal rule for integrating a vector.
4 years ago
2eaf35f633
fix a double application of device multiplier for certain diode parameter
4 years ago
422719200e
re-enable parameters in agauss function
fixes bug #564 reported by Stefan Schippers
If nested braces {..{ }...} have been created,
replace the inner { } by ( )
4 years ago
a68cfefb28
hcopywidth and hcopyheight failed with SVG plot
cp_getvar read CP_NUM, not CP_STRING
Patch #108 contributed by Giles Atkinson
Add hcopywidth and hcopyheight to example nmos_out_BSIM330_svg.sp
4 years ago
b749e62e31
Make error message more verbose
4 years ago
aaf586ae83
.probe: Add more safeguards to prevent crashes
in case of wrong user input
due to obtain empty lines in shared ngspice
4 years ago
bb9f1669f6
Enable math characters also in tokens like i(z/z) by
temporarily putting " around the token.
Improve error message on missing vector
4 years ago
b59d2aabd1
.probe: Add function call to modprobenames()
Function resides in inpc_probe.c.
The function renames all current measurement instances
vcurr_instance:node#branch to instance:node#branch by
modifying the global instance table (tab).
4 years ago
Brian Taylor
Holger Vogt
Giles Atkinson
Kevin Zheng
roman
dwarning
Carsten Schoenert