avp_teleoperate

Unitree Robotics

English | 中文

# 📺 Video Demo

Watch the video

# 0. 📖 Introduction This repository implements teleoperation of the **Unitree humanoid robot** using **Apple Vision Pro**. Here are the robots that will be supported,
🤖 Robot ⚪ Status 📝 Remarks
G1 (29DoF) + Dex3-1 ✅ Completed
H1 (Arm 4DoF) ⏱ In Progress Refer to this branch's ik temporarily
H1_2 (Arm 7DoF) + Inspire ✅ Completed Refer to this branch
··· ··· ···
Here are the required devices and wiring diagram,

Watch the Document

# 1. 📦 Prerequisites We tested our code on Ubuntu 20.04 and Ubuntu 22.04, other operating systems may be configured differently. For more information, you can refer to [Official Documentation ](https://support.unitree.com/home/zh/Teleoperation) and [OpenTeleVision](https://github.com/OpenTeleVision/TeleVision). ## 1.1 🦾 inverse kinematics ```bash unitree@Host:~$ conda create -n tv python=3.8 unitree@Host:~$ conda activate tv # If you use `pip install`, Make sure pinocchio version is 3.1.0 (tv) unitree@Host:~$ conda install pinocchio -c conda-forge (tv) unitree@Host:~$ pip install meshcat (tv) unitree@Host:~$ pip install casadi ``` > p.s. All identifiers in front of the command are meant for prompting: **Which device and directory the command should be executed on**. > In the Ubuntu system's `~/.bashrc` file, the default configuration is: `PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '` > > Taking the command `(tv) unitree@Host:~$ pip install meshcat` as an example: > > - `(tv)` Indicates the shell is in the conda environment named `tv`. >- `unitree@Host:~` Shows the user `\u` `unitree` is logged into the device `\h` `Host`, with the current working directory `\w` as `$HOME`. > - `$` shows the current shell is Bash (for non-root users). > - `pip install meshcat` is the command `unitree` wants to execute on `Host`. > > You can refer to [Harley Hahn's Guide to Unix and Linux](https://www.harley.com/unix-book/book/chapters/04.html#H) and [Conda User Guide](https://docs.conda.io/projects/conda/en/latest/user-guide/getting-started.html) to learn more. ## 1.2 🕹️ unitree_sdk2_python ```bash # Install unitree_sdk2_python. (tv) unitree@Host:~$ git clone https://github.com/unitreerobotics/unitree_sdk2_python.git (tv) unitree@Host:~$ cd unitree_sdk2_python (tv) unitree@Host:~$ pip install -e . ``` # 2. ⚙️ TeleVision and Apple Vision Pro configuration ## 2.1 📥 basic ```bash (tv) unitree@Host:~$ cd ~ (tv) unitree@Host:~$ git clone https://github.com/unitreerobotics/avp_teleoperate.git (tv) unitree@Host:~$ cd ~/avp_teleoperate (tv) unitree@Host:~$ pip install -r requirements.txt ``` ## 2.2 🔌 Local streaming **Apple** does not allow WebXR on non-https connections. To test the application locally, we need to create a self-signed certificate and install it on the client. You need a ubuntu machine and a router. Connect the Apple Vision Pro and the ubuntu **Host machine** to the same router. 1. install mkcert: https://github.com/FiloSottile/mkcert 2. check **Host machine** local ip address: ```bash (tv) unitree@Host:~/avp_teleoperate$ ifconfig | grep inet ``` Suppose the local ip address of the **Host machine** is `192.168.123.2` > p.s. You can use `ifconfig` command to check your **Host machine** ip address. 3. create certificate: ```bash (tv) unitree@Host:~/avp_teleoperate$ mkcert -install && mkcert -cert-file cert.pem -key-file key.pem 192.168.123.2 localhost 127.0.0.1 ``` place the generated `cert.pem` and `key.pem` files in `teleop` ```bash (tv) unitree@Host:~/avp_teleoperate$ cp cert.pem key.pem ~/avp_teleoperate/teleop/ ``` 4. open firewall on server: ```bash (tv) unitree@Host:~/avp_teleoperate$ sudo ufw allow 8012 ``` 5. install ca-certificates on Apple Vision Pro: ```bash (tv) unitree@Host:~/avp_teleoperate$ mkcert -CAROOT ``` Copy the `rootCA.pem` via AirDrop to Apple Vision Pro and install it. Settings > General > About > Certificate Trust Settings. Under "Enable full trust for root certificates", turn on trust for the certificate. Settings > Apps > Safari > Advanced > Feature Flags > Enable WebXR Related Features. ## 2.3 🔎 Test environment This step is to verify that the environment is installed correctly. 1. Download Isaac Gym: https://developer.nvidia.com/isaac-gym/download Extracting to the current directory, go to the `IsaacGym_Preview_4_Package/isaacgym/python` directory and execute the command: ```bash (tv) unitree@Host:~/IsaacGym_Preview_4_Package/isaacgym/python$ pip install -e . ``` 2. After setup up streaming with local following the above instructions, you can try teleoperating two robot hands in Issac Gym: ```bash (tv) unitree@Host:~/avp_teleoperate$ cd teleop (tv) unitree@Host:~/avp_teleoperate/teleop$ python teleop_test_gym.py ``` 3. Wear your Apple Vision Pro device. 4. Open Safari on Apple Vision Pro and visit: https://192.168.123.2:8012?ws=wss://192.168.123.2:8012 > p.s. This IP address should match the IP address of your **Host machine**. 5. Click `Enter VR` and `Allow` to start the VR session. 6. See your hands in 3D! # 3. 🚀 Usage Please read the [Official Documentation ](https://support.unitree.com/home/zh/Teleoperation) at least once before starting this program. ## 3.1 🖼️ Image Server Copy `image_server.py` in the `avp_teleoperate/teleop/image_server` directory to the **Development Computing Unit PC2** of Unitree Robot (G1/H1/H1_2/etc.), and execute the following command **in the PC2**: ```bash # p.s.1 You can transfer image_server.py to PC2 via the scp command and then use ssh to remotely login to PC2 to execute it. # p.s.2 The image transfer program is currently configured for binocular rgb cameras. # Now located in Unitree Robot PC2 terminal unitree@PC2:~/image_server$ python image_server.py # You can see the terminal output as follows: # Image server has started, waiting for client connections... # Image Resolution: width is 640, height is 480 ``` After image service is started, you can use `image_client.py` **in the Host** terminal to test whether the communication is successful: ```bash (tv) unitree@Host:~/avp_teleoperate/teleop/image_server$ python image_client.py ``` ## 3.2 ✋ Inspire hands Server (optional) > Note: If the selected robot configuration does not use the Inspire dexterous hand, please ignore this section. You can refer to [Dexterous Hand Development](https://support.unitree.com/home/zh/H1_developer/Dexterous_hand) to configure related environments and compile control programs. First, use [this URL](https://oss-global-cdn.unitree.com/static/0a8335f7498548d28412c31ea047d4be.zip) to download the dexterous hand control interface program. Copy it to **PC2** of Unitree robots. On Unitree robot's **PC2**, execute command: ```bash unitree@PC2:~$ sudo apt install libboost-all-dev libspdlog-dev # Build project unitree@PC2:~$ cd h1_inspire_service & mkdir build & cd build unitree@PC2:~/h1_inspire_service/build$ cmake .. -DCMAKE_BUILD_TYPE=Release unitree@PC2:~/h1_inspire_service/build$ make # Terminal 1. Run h1 inspire hand service unitree@PC2:~/h1_inspire_service/build$ sudo ./inspire_hand -s /dev/ttyUSB0 # Terminal 2. Run example unitree@PC2:~/h1_inspire_service/build$ ./h1_hand_example ``` If two hands open and close continuously, it indicates success. Once successful, close the `./h1_hand_example` program in Terminal 2. ## 3.3 🚀 Start > ![Warning](https://img.shields.io/badge/Warning-Important-red) > > 1. Everyone must keep a safe distance from the robot to prevent any potential danger! > > 2. Please make sure to read the [Official Documentation](https://support.unitree.com/home/zh/Teleoperation) at least once before running this program. > > 3. Always make sure that the robot has entered [debug mode (L2+R2)](https://support.unitree.com/home/zh/H1_developer/Remote_control) to stop the motion control program, this will avoid potential command conflict problems. > It's best to have two operators to run this program, referred to as **Operator A** and **Operator B**. Now, **Operator B** execute the following command on **Host machine** : ```bash (tv) unitree@Host:~/avp_teleoperate/teleop$ python teleop_hand_and_arm.py --record ``` And then, **Operator A** 1. Wear your Apple Vision Pro device. 2. Open Safari on Apple Vision Pro and visit : https://192.168.123.2:8012?ws=wss://192.168.123.2:8012 > p.s. This IP address should match the IP address of your **Host machine**. 3. Click `Enter VR` and `Allow` to start the VR session. When host terminal outputs "Please enter the start signal (enter 'r' to start the subsequent program):", **Operator B** can start teleoperation program by pressing the **r** key in the terminal. At this time, **Operator A** can remotely control the robot's arms and dexterous hands. Next, **Operator B** can press **s** key to begin recording data in the 'record image' window that opens, and press **s** again to stop. This can be repeated as necessary. > p.s. Recorded data is stored in `avp_teleoperate/teleop/data` by default, with usage instructions at this repo: [unitree_IL_lerobot](https://github.com/unitreerobotics/unitree_IL_lerobot/tree/main?tab=readme-ov-file#data-collection-and-conversion). ## 3.4 🔚 Exit To exit the program, **Operator B** can press the **q** key in the 'record image' window. > ![Warning](https://img.shields.io/badge/Warning-Important-red) > > To avoid damaging the robot, it's best to ensure that **Operator A** positions the robot's arms in a naturally lowered or appropriate position before **Operator B** presses **q** to exit. # 4. 🗺️ Codebase Tutorial ``` avp_teleoperate/ │ ├── assets [Storage of robot URDF-related files] │ ├── teleop │ ├── image_server │ │ ├── image_client.py [Used to receive image data from the robot image server] │ │ ├── image_server.py [Capture images from cameras and send via network (Running on robot's on-board computer)] │ │ │ ├── open_television │ │ ├── television.py [Using Vuer to capture wrist and hand data from apple vision pro] │ │ ├── tv_wrapper.py [Post-processing of captured data] │ │ │ ├── robot_control │ │ ├── robot_arm_ik.py [Inverse kinematics of the arm] │ │ ├── robot_arm.py [Control dual arm joints and lock the others] │ │ ├── robot_hand_inspire.py [Control inspire hand joints] │ │ ├── robot_hand_unitree.py [Control unitree hand joints] │ │ │ ├── utils │ │ ├── episode_writer.py [Used to record data for imitation learning] │ │ ├── mat_tool.py [Some small math tools] │ │ ├── weighted_moving_filter.py [For filtering joint data] │ │ │ │──teleop_hand_and_arm.py [Startup execution code for teleoperation] | |——teleop_test_gym.py [Can be used to verify that the environment is installed correctly] ``` # 5. 🛠️ Hardware ## 5.1 📋 List | Item | Quantity | Link | Remarks | | :--------------------------: | :------: | :----------------------------------------------------------: | :---------------------------------------------------------: | | **Unitree Robot G1** | 1 | https://www.unitree.com/g1 | With development computing unit | | **Apple Vision Pro** | 1 | https://www.apple.com/apple-vision-pro/ | | | **Router** | 1 | | | | **User PC** | 1 | | Recommended graphics card performance at RTX 4080 and above | | **Head Stereo Camera** | 1 | [For reference only] http://e.tb.cn/h.TaZxgkpfWkNCakg?tk=KKz03Kyu04u | For head | | **Head Camera Mount** | 1 | https://github.com/unitreerobotics/avp_teleoperate/blob/g1/hardware/head_stereo_camera_mount.STEP | For mounting head stereo camera, FOV 130° | | Intel RealSense D405 | 2 | https://www.intelrealsense.com/depth-camera-d405/ | For wrist | | Wrist Ring Mount | 2 | https://github.com/unitreerobotics/avp_teleoperate/blob/g1/hardware/wrist_ring_mount.STEP | Used with wrist camera mount | | Left Wrist Camera Mount | 1 | https://github.com/unitreerobotics/avp_teleoperate/blob/g1/hardware/left_wrist_D405_camera_mount.STEP | For mounting left wrist RealSense D405 camera | | Right Wrist Camera Mount | 1 | https://github.com/unitreerobotics/avp_teleoperate/blob/g1/hardware/right_wrist_D405_camera_mount.STEP | For mounting right wrist RealSense D405 camera | | M3 hex nuts | 4 | [For reference only] https://a.co/d/1opqtOr | For Wrist fastener | | M3x12 screws | 4 | [For reference only] https://amzn.asia/d/aU9NHSf | For wrist fastener | | M3x6 screws | 4 | [For reference only] https://amzn.asia/d/0nEz5dJ | For wrist fastener | | **M4x14 screws** | 2 | [For reference only] https://amzn.asia/d/cfta55x | For head fastener | | **M2x4 self-tapping screws** | 4 | [For reference only] https://amzn.asia/d/1msRa5B | For head fastener | > Note: The bolded items are essential equipment for teleoperation tasks, while the other items are optional equipment for recording [datasets](https://huggingface.co/unitreerobotics). ## 5.2 🔨 Installation diagram
Item Simulation Real
Head
head
Head Mount
head
Side View of Assembly
head
Front View of Assembly
Wrist
wrist
Wrist Ring and Camera Mount
wrist
Left Hand Assembly
wrist
Right Hand Assembly
> Note: The wrist ring mount should align with the seam of the robot's wrist, as shown by the red circle in the image. # 6. 🙏 Acknowledgement This code builds upon following open-source code-bases. Please visit the URLs to see the respective LICENSES: 1) https://github.com/OpenTeleVision/TeleVision 2) https://github.com/dexsuite/dex-retargeting 3) https://github.com/vuer-ai/vuer 4) https://github.com/stack-of-tasks/pinocchio 5) https://github.com/casadi/casadi 6) https://github.com/meshcat-dev/meshcat-python 7) https://github.com/zeromq/pyzmq 8) https://github.com/unitreerobotics/unitree_dds_wrapper 9) https://github.com/tonyzhaozh/act 10) https://github.com/facebookresearch/detr 11) https://github.com/Dingry/BunnyVisionPro